Thermosphere Underfloor Mesh Heating Mat Set
Made in Germany, this unique matting system has TwistedTwin heating cables that are only 3.5mm thick yet incredibly robust and longer lasting than comparable products on the market. By twisting them together, the electromagnetic field is eliminated and any stress, expansion and contraction of the cable is neutralised.
Built with safety in mind, the cables have a tough fluoropolymer coating on the outside as well as the internal conductors, a continuous armoured earth sheath and multi strand twin conductors. It's also got a twisted, multi strand earth braid across the entire length of the cable.
Easy to install on both concrete and timber substrates, Thermosphere Underfloor Mesh has Layflat technology which makes it quicker to install with less hassle. The self-adhesive fibreglass mesh sticks to your substrate and stops it floating in levelling compound or rising up through tile adhesive. It also features a low profile cold tail connection that's the thinnest on the market and has been designed to allow you to lay the matting flat to the floor, even when you need to curve it around corners. It's also recommended that you lay this matting on insulation boards to prevent downwards heat loss and maximise the efficiency of your heating. You'll need coated insulation boards for timber substrates and uncoated for concrete substrates (sold separately - see recommended extras)
You can use this product under carpet, laminate, wooden or tiled flooring. For installation under carpet, laminate or wooden flooring, simply use a layer of self-levelling compound over the top of the matting, for tiled flooring you'll need to use a layer of flexible tile adhesive (sold separately - see recommended extras).
With a single connection cable and the ability to wire multiple mats in parallel to a single thermostat (up to 3600W & sold separately), there's no need to chisel out your substrate, and you can also install within the adhesive layer of a tiled floor without the need for levelling compound or raising the floor level.
• Comes with: Thermosphere Underfloor Mesh self adhesive mat, factory test certificate & an installation guide
• 100W/m² matting is designed for using as a secondary heat source or as a primary heat source in well insulated new build homes.
• 150W/m² matting is designed for using as a primary heat source in well insulated areas with coverage of at least 80% of the floor.
• 200W/m² matting is designed for using as a primary heat source in areas of low insulation such as conservatories, or as a primary heat source in small rooms where floor space is limited.
• Made in Germany to the highest European standards
• TwistedTwin heating cable is incredibly safe, robust and longer lasting than others available on the market
• LayFlat technology makes installation super easy
• High grab self-adhesive mesh made from high quality fiberglass
• Cables are only 3.5mm thick
• Incredibly energy efficient
• Safe to use in wet areas
• Can be installed on concrete and timber substrates
• If installing on concrete substrates it's recommended to use an uncoated insulation board - sold separately, see recommended extras
• If installing on timber substrates it's recommended to use a coated insulation board - sold separately, see recommended extras
• Lifetime manufacturers guarantee
|Type||Underfloor Heating Mats|
|Fuel SourceMore information||Electric|
|Popular Features||Slimline Design|
|Heat Output (Watts)More information||200|
|Global Trade Item Number||5056257300597|
This is the source of fuel your radiator or towel rail will use to provide heat. Radiators will generate heat through central heating systems, electricity, or a combination of both with dual fuel.
These radiators will generate heat through the water pumped round your central heating system.
Electric radiators contain fluid heated by an electrical element. They plug into a socket or are wired directly into the mains.
Dual fuel radiators are able to run on both central heating and electric power. They contain a ‘summer’ heating element which will allow you to use your radiator in warmer months without needing to turn on your entire central heating system.
Watts is a measure of heat output used for electric radiators, with a higher watt figure meaning a higher heat output. Purchasing a radiator that has the correct wattage will ensure your room will be at a comfortable temperature without wasting energy.
By using our BTU calculator, you can calculate the number of watts your radiator needs to adequately heat your room.
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.